News:

Calling all communications systems experts - please share your knowledge here!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - Dave Loucks

#41
If you haven't seen this link already, wanted everyone to know that I've scanned several of the old paper manuals, technical documents and even some of my application notes and programs and put them at http://pps2.com/communications/799.php.

The information includes:

       
  • Numa Logic Communication Overview
    Includes information on 6-byte protocol, Westnet II Data Highway RS-232 Asynchronous protocol, HPPC asynchronous advanced program loader (APL) protocol, PC1100/1200 Local Area Network protocol, PC500/502/503 and PC2000 (Siemens S5-100 and S5-115 PLCs, respectively rebranded to Westinghouse), as well as program loader port protocols.  All this information is stored in two documents:
        Numa-Logic Communication Overview (3.2 MB, 81 pages, scanned)
        Numa-Logic Communication Appendix (2 MB, 69 pages, scanned)
  • NCMZ-1799 manual (also good for NCMZ-799)
  • Numa-Logic PC100 / PC110 Programmable Controllers Operations and Programming Manual
  • PC100 and PC110 Installation, Operation and Programming Manual
  • NCMZ-798 hardware manual (preliminary 888 kB, 19 pages, scanned)
  • NCMZ-798 BASIC Interpreter Optional Firmware (preliminary 661 kB, 40 pages, scanned)
  • NCMZ-798 1100 LAN Optional Firmware (preliminary 1.3 MB, 44 pages, scanned)
  • NCMZ-798-11 Alarm Text Optional Firmware (preliminary 310 kB, 18 pages, scanned)
  • NCMZ-798-61 Radial Comm Optional Firmware (preliminary 466 kB, 16 pages, scanned)
  • NCMZ-798-91 Modbus Slave Optional Firmware (preliminary 356 kB, 11 pages, scanned)
  • Numa-Logic NL-300 (NL 3xx) Hardwired Card Logic Instructions, Wiring and Operations Manual
  • Numa-Logic PC700 / PC900 / PC1100 Advanced Program Loader Manual
  • Numa-Logic PC700/900/1100/1200/1250 Program Loader Manual (preliminary 19.9 MB, 84 pages, scanned)
  • Numa-Logic PC1100 / PC1200 / PC1250 Programmable Controllers
  • Programming Software for Numa-Logic PC 700, 900, 1100, 1200 and 1250 Programmable Controllers
  • NLSW-784 Programming Software
  • Numa-Logic HPPC 1500 / HPPC1700 / (a.k.a. the "Hippo")

This product family was discontinued back in the days before PDF's (some of this information dates back to the late 1970's).  If anyone knows about manuals or technical documentation that you'd like to share, let me know and I'll get it posted.
#42
COMTRADE / COMTRADE parsing VBA (Excel) code
June 05, 2014, 10:29:08 AM
New Features (V0.16h alpha) (31-OCT-17 (latest version)
  • various bug clean up and stability improvements

Download this latest version at: https://pps2.com/cei/cei_16h.xlsb

Note: This Excel file contains macros and Windows will block execution of those macros by default.  View this Microsoft article on how to unblock this feature so you can run the spreadsheet.

You will also be prompted to "update links" when first opening.  Click Don't Update
Next click on the Graphing tab to view an example COMTRADE file that was imported.  Click the Zoom+ or Zoom- to zoom the waveform.  Press < Shift or Shift > to pan through the waveform.




New Features (V0.16g alpha) (22-MAY-17 (latest version)
  • various bug clean up and stability improvements

Download this latest version at: http://loucks.ws/v/ct/cei_16g.xlsb

Or as always you can check and download the latest from within the program:





New Features (V0.16d alpha) (22-FEB-17)
  • ability to perform math on data
    You can select up to 4 "math  pens" that are computed values based on +, -, *, / between any other data (including previously calculated values, so the equations can chain to build more complex y=(mx+b)/c kind of equations

Known bugs:
  • Performing math on large data blocks
    When doing math on multiple chained files, the calculated values are only visible when zoomed in to the high resolution data.  When zoomed out, no math trends are shown for long multiple-file captures.

Here's a video tutorial on how to use this math functionality.


Download this latest version at: http://loucks.ws/v/ct/cei_16d.xlsb

Or as always you can check and download the latest from within the program:




New Features (V0.15d alpha) (3-FEB-17)
  • rms calculation
    You can now select from 1 to 5 trends from the COMTRADE file over which you can compute an rms calculation and plot as an overlay to the regular waveform data

  • Ability to display Fourier plots
    Using the 'aux' data tab, you can now drop in data where rather than having the x-axis be a time value, the x-axis can be frequency

  • Logarithmic x-axis
    Added to support the ability to display Fourier series data

Here's a video tutorial on how to use the rms functionality.


Download this latest version at: http://loucks.ws/v/ct/cei_15d.xlsb


New Features (V0.15 alpha)
  • Proxy server support
    Now includes ability to connect to meter via FTP routed through a proxy server.  Just check the checkbox and enter your proxy server address, colon, then port
  • FTP download bug fixes
  • FFT graphing bug fixes

Download this latest version at: http://loucks.ws/v/ct/cei_15.xlsb


New Features (V0.14n alpha)
  • New FFT features

Download this latest version at: http://loucks.ws/v/ct/cei_14n.xlsb

Watch a video screencast video on how to use these FFT features:
https://pps2.com/v/s/1/ceifft.php

Did you have trouble getting the FFT function to run inside Excel?  You might have either not installed the Analysis Toolpak, or you might not have enabled the functionality within Excel.  Check out this video for an explanation:
https://pps2.com/v/s/1/atp.php


New Features (V0.14g alpha)
  • Fixed compatibility issues

Download this latest version at: http://loucks.ws/v/ct/cei14g.xlsb


New Features (V0.13n alpha)
  • Pan and Zoom operate much faster (~10x)
  • FFT features re-enabled (when I began the process of speeding up the code, I broke the FFT functionality.  Now fixed.)
  • Lissajous pattern plotting re-enabled (it too was broken when I wrote the faster code.  Now fixed.)

The new PX meter firmware captures 18 seconds (2.5 seconds pre-trigger and 15.5 post-trigger).

Download this latest version at: http://loucks.ws/v/ct/cei13n.xlsb

Here's the screencast explaining how to use the new features:
http://pps2.com/v/1/v013n.php


Features (V0.13k alpha)
  • COMTRADE import works 15x faster

Download this latest version at: http://loucks.ws/v/ct/cei13k.xlsb


Previous Version (V0.13a alpha)
(bug fixed that caused "Single" button download to fail)

  • Able to import and append multiple sequential COMTRADE files
The latest Power Xpert meters allow sequential file captures to retrieve longer high speed captures.  This tool allows you to select those files and have them appended one to another.  Excel 2010 (tested on) limits spreadsheets to no more than 1 million rows, so the program will crash if attempting to import more than that.  Practically speaking, Excel starts to bog down, so you may find it more useful to only import the portions of the waveform files that contain information you find useful.  That might mean importing them all, noting which file or files (based on time stamp) contains the information of interest and repeat the import with just those files.

Also, since this program was written without requiring add-ins (which require admin rights to install), I can only use VBA to parse the files.  Large files can require minutes to process.  Likely a future version will include an add-in (compiled parsing code) to speed through the import for those users who have admin rights on their computer.

Here's the screencast that explains how to use these latest features:
http://pps2.com/v/1/v13.php

Download this latest version at: http://loucks.ws/v/ct/cei13a.xlsb


Previous Version (V0.12) Features

  • Ability to plot pens to a third scaling axis
  • Ability to plot only a portion of the COMTRADE sequence (useful when viewing Lissajous patterns)
  • Ability to import any time sequence data and plot it (no longer must be a COMTRADE file)
  • Ability to plot mathematical relationships (e.g. can plot Z = V/I, or anything else using Excel's built-in math functionality)

Here's the screencast that explains how to use these latest features:
http://pps2.com/v/1/v12.php

Download this latest version at: http://loucks.ws/v/ct/cei12a.xlsb
(Note: fixed bug in the 0.12a version that caused very slow operation in previous versions.)


Previous Version (V0.11) Features
  • Ability to plot to secondary axis
  • Ability to measure phase shift between plotted values

Here's the screencast that explains how to use these latest features:
http://pps2.com/v/1/cei011.php

Download previous version V0.11 at: http://loucks.ws/v/ct/cei11.xlsb


Previous Version (V0.1) Features
  • Graphing feature added

Watch the screencast that explains the features added for this version: http://pps2.com/v/1/cei01_00.php

Download the previous version V0.1 at: http://loucks.ws/v/ct/cei10.xlsm




If you are interested in the VBA code that performs these functions I demonstrate how to use VBA to:
  • Zoom and pan around an Excel plot
  • Select points from the plot by clicking on them, then perform math on the selected points
  • Select and deselect multiple y-axis values (any of the trended values in the COMTRADE file) and deal with the legend properly
  • Allow selecting any of the trended values in the COMTRADE file as the x-axis.  This allows plotting Lissajous x-y plots as well as parameter-vs-time plots



V 0.09 version is now available:
loucks.ws/v/ct/cei9_04.xlsm... or just click the check version link inside the earlier version to download the new version for free.

Flash version of screencast tutorial on how to use (I'll re-record this version's screencast in friendlier media format eventually!): http://loucks.ws/v/ct/update.html

Sample COMTRADE files to test out system:
https://app.box.com/s/yyi3ws6pk16ryhrhziw5uyny2d9y66af



Changes:
  • Parsing of COMTRADE file >3x faster
  • Supports opening COMTRADE files from either local or FTP sites
  • Includes FFT analysis (requires free Microsoft Analysis Toolkit to be installed)
    Example included on how to calculate FFT of ground current (IG).  Note: Microsoft's tool kit limits FFT analysis to only 4096 points.  Over a first generation PX 4/6/8K (15360 samples/sec) this works out to 3.75 Hz resolution.  On a second generation PXM (30720 samples/sec) the same 4096 points halves the resolution to 7.5 Hz.

    The program scans the available data and provides a convenient pull-down menu to select which value to perform the FFT analysis over.  A second pull-down menu allows selecting which group of 4096 points to scan.  Press the Solve button to compute Fourier coefficients.


    FFT data will be shown in the table:


    Alternatively, FFT data can be viewed graphically by navigating to the FFT Graph tab:

    The blue dots represent the calculated FFT coefficients over the first 4096 samples, the red line, the second 4096 samples and the green dots the third.


Waveform capture files from power meters, circuit breakers, reclosers and other IEDs (Intelligent Electronic Devices, in the utility vernacular) can provide valuable diagnostic information.  Use this application to open a waveform file stored in the IEEE COMTRADE format and load the data found into an Excel spreadsheet.  From Excel it is then a simple matter to create graphs, charts and other reports of the COMTRADE data.

I created a screencast that shows how to use it: loucks.ws/v/ct

You can download the Excel spreadsheet here: loucks.ws/v/ct/cei7b.xlsm

The VBA code is opened by clicking on Developer, then Visual Basic:


Once open, navigate through the VBA IDE to review my code.


#43
25-pin EIA-232 Port



   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
Pin No.NameDirNotes/Description
1PGNDINProtective ground.  Cable shield connected here.
2TDOUTTransmit Data (a.k.a TxD, Tx). Sending data to DCE from DTE.
3RDINReceive Data (a.k.a RxD, Rx). Arriving data from DCE.
4RTSOUTRequest to Send.  Raised by DTE when it wishes to send.  Expects CTS from DCE.
5CTSINClear to Send. Raised by DCE in response to RTS from DTE
6DSRINData Set Ready. Raised by DCE to indicate ready.
7SGND-Signal ground / common for all other signals.
8DCDINData Carrier Detect. Raised by DCE when modem synchronized.
9+OUT+VOLTAGE.  Defined but typically not implemented.
10-OUT-VOLTAGE.  Defined but typically not implemented.
11--Unassigned pin.  No connection.
12sDCDINSecondary Data Carrier Detect (or Received Line Signal Detector)
13sCTSINSecondary Clear To Send.
14sTDOUTSecondary Transmit Data (sTxD).
15TSETINTransmitter Signal Element Timing.
16sRDINSecondary Received Data (sRxD).
17RSETINReceiver Signal Element Timing.
18LLOUTLocal Loopback.
19sRTSOUTSecondary Request To Send.
20DTROUTData Terminal Ready.  Typically raised when the data terminal (PC or PLC) is powered and ready.
21RLOUTRemote Loopback.
22RIINRing Indicate.  Raised by DCE and sent to DTE to tell DTE to get ready... a call is coming.
23sCTS-Data Signal Rate Selector. Can sent by either DCE or DTE.
24ETSETOUTExternal Transmit Signal Element Timing.
25TMINTest Mode.

9-pin EIA-232 Port



   
   
   
   
   
   
   
   
   
   
Pin No.NameDirNotes/Description
1DCDINData Carrier Detect. Raised by DCE when modem synchronized.
2RDINReceive Data (a.k.a RxD, Rx). Arriving data from DCE.
3TDOUTTransmit Data (a.k.a TxD, Tx). Sending data from DTE.
4DTROUTData Terminal Ready. Raised by DTE when powered on. In auto-answer mode raised only when RI arrives from DCE.
5SGND-Ground
6DSRINData Set Ready. Raised by DCE to indicate ready.
7RTSOUTRequest To Send. Raised by DTE when it wishes to send. Expects CTS from DCE.
8CTSINClear To Send. Raised by DCE in response to RTS from DTE.
9RIINRing Indicator. Set when incoming ring detected - used for auto-answer application. DTE raised DTR to answer.
#44
Modbus / Modbus VB and VBA code examples
May 23, 2012, 10:31:46 AM
If you are interested in developing a Modbus Master application, here are some programs that I wrote that you can extract code from.

Note that VB 6.0 is obsolete, but you might still have a compiler.

VB2010 Express is available as a free download (for evaluation purposes) from Microsoft.  VB2013 is also available.

VB 6.0
http://pps2.com/smf/index.php/topic,12.0.html
This link takes you to a topic discussing the Encorp GPC controller and how I wrote some code to program that controller using Modbus rather than using the Lonworks protocol (which required a converter box).  The VB 6.0 source code is included in that topic.

VB 2010 Express
http://pps2.com/smf/index.php/topic,4.0.html
Here's an example located elsewhere on this board of a program that I wrote to demonstrate INCOM pass-through using Modbus RTU.  Embedded within this code is an example of how to write Modbus commands to read and write tables of registers.  This topic also includes  a link where you can download the Modbus source code I used to create a stand-alone Eaton Automatic Transfer Switch setpoint editor.  Note that while this example is somewhat complex (I wrote code that embedded INCOM messages within Modbus packets which were decoded by a Modbus MINT and transmitted as INCOM messages to an ATC-600 or 800 transfer switch controller), it shows how to write VB2010 code to send and receive Modbus RTU messages via the COM serial ports.

Visual Basic for Applications - VBA (Excel 2010)



http://pps2.com/smf/index.php/topic,29.msg39.html#msg39
VB and VBA have different syntax. Neither of the VB programs above could be imported into Excel's VBA scripting language and work.  So I wrote an Excel 2010 VBA Modbus program pretty much from scratch (including a new CRC-16 algorithm and a new way of interfacing with the PC hardware using Windows API calls -- didn't want to have to load any special driver -- just wanted to use "stock" Excel 2010).  The application I was developing was a tool to support programming Eaton's Modbus MINT (mMINT - a simple protocol converter that translates from the legacy Westinghouse INCOM/IMPACC protocol to Modbus RTU on 485).  That converter had a variety of configuration registers and people needed to resort to using something like MODSCAN to read and write them.  A real pain.  I wrote this to collect the data and write into Excel cells.  From there it was easy to read and edit.  Once done, you would press another button to write the data back to the mMINT.  So if you wanted a template on how to get Excel to talk to the serial ports on your computer just open this VBA program and you'll see how I got VBA talking Modbus!
#45
Legacy IQ Products / PowerNet software
April 20, 2012, 10:05:29 AM
PowerNet Manuals and Documentation
(after clicking on this link, scroll to the bottom of the page that appears)

PowerNet was the replacement for Series III software when the release of Windows NT made it mandatory that this power monitoring software be upgraded (Series III did not run on NT).  Originally conceived as a maintenance upgrade, the scope of the project required a major rewrite.  Since the project scope expanded, the decision was to change the package from a running on a single PC to permitting different modules of the program to be loaded on multiple computers in a distributed client-server architecture.

These different modules included:

  • Device Server
    This was the I/O scanner application.  Typically one or more computers and/or Netlinks were fitted with one or more CONI cards or MINTs with each collecting field bus data (INCOM twisted pairs, one INCOM network per CONI or MINT) from dozens to thousands of devices such as meters, protective relays or I/O.  The data was collected by the Device Server application and pushed onto the Ethernet network at a rate specified by the user (fast, slow, or on-demand only).

    More up-to-date information on CONIs and MINTs (as well as the more modern replacements called PowerXpert Gateways or PXGs) is available on the Eaton Communication Hardware web site .

  • Modbus Gateway
    This application typically ran in a Netlink and would permit data available on the PowerNet Ethernet backbone to be shared with a Modbus RTU master.  The external Modbus master (such as a PLC, DCS or building manager system) could interrogate the PowerNet system to read data (such as voltage, current, etc.) or write data (to open or close breakers, etc.).

  • Configurator
    Application that allowed the programmer to tell the PowerNet system which IQ devices were connected to which , provide a name, establish how fast the device should be polled, whether its data should be logged and if its data should be time stamped.

  • License Manager
    Permitted "floating" licenses rather than connecting a license to a particular PC.

  • Security Manager
    Created users on the PowerNet system, each with specific privledges.

  • Setpoints / Trip Curve
    This application gave the user remote access to meter, circuit breaker and protective relay settings.  If the device was configured to permit remotely changing the setpoints, this application would configure the devices.  If remote changing was inhibited, this application would allow displaying the setpoints of the device(s).

  • Tools
    This application collected data from the various device servers and stored it in a common ODBC database.  This database was commonly used with E-Bill and E-Trend to creating billing data using historical data.

  • Waveform Viewer
    Allowed displaying and uploading waveform files collected in meters, protective relays and circuit breakers.

  • DDE Server
    Allowed a remote computer running the Windows Dynamic Data Exchange (DDE) and acting as a master to collect data from a PowerNet system as a DDE slave.

  • Integrator
    An implementation of the Iconics GenesisTM graphics software that communicated with PowerNet using the NetPower DDE Server application.  More details on the Integrator application can be found by viewing Appendix E of the PowerNet manual.

  • E-Bill
    Allowed users to generate bills for energy consumers.  Included ability to change rate schedules, rate periods, seasons and individual billing formulas.

  • E-Log DDE
    This application allowed non-Eaton programs to collect the energy data that was stored the PowerNet system from each of the devices.

  • E-Trend
    This program displayed trended energy data graphically.

#46
FAX Retrieval of Engineering Documents (FRED)

The Power Management Products Center (PMPC) developed a collection of technical documents for metering, protective relaying and power management software that were added to the original Westinghouse FRED system.

You can see a listing of those documents at http://pps2.com/communications/files/legacyPMP/litindex.htm.
#47
http://pps2.com/communications/files/legacyPMP/prodind.htm

A CD was created back around 1999 that collected the current and legacy IQ, IMPACC and software products of the era.


The CD was created with many of the manuals, instruction booklets, software downloads and other technical information.  It was created with an HTML menu system.  Unfortunately, it was used and tested only on a Windows system.  Windows ignores case in URL addresses, so many of the file names and the link names used mixed case.  This worked fine under Windows however when this content was uploaded to this server, the menu system no longer worked.

This is because this message board is hosted on a system running Linux, and like UNIX, Linux cares about the case in URLs.

To get the system up and running as soon as possible, we ran a couple of scripts to rename the files and all the text in the files referencing these links to lowercase.  A byproduct of that renaming script is that the text in the menus is now all lowercase.  The content referenced by those links is unaffected.

Most of the links should now work (if they don't it is because we missed it... just rename the path to have all lowercase characters after the "legacyPMP/".
#49
Networking Hardware / Power Xpert Architecture
April 11, 2012, 08:58:01 AM
Discusses current models of gateways, gateway cards, Ethernet switches, INCOM interfaces (IPONI, MPONI, DPONI, MINTII, mMINT and PMINT):

http://www.eaton.com/Electrical/USA/ProductsandServices/PowerQualityandMonitoring/NetworkingHardware/index.htm

#50
INCOM / IMPACC / NRX Communications Adapter
April 11, 2012, 08:51:58 AM
Installation instructions for Series NRX INCOM Communications Adapter Module (ICAM):

http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/il01301033e.pdf
#51
INCOM / IMPACC / Wiring Guide
April 11, 2012, 08:49:48 AM
INCOM / EIA-485 / Ethernet Recommended Wiring Practices for Eaton Equipment

http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/td17513_appnote.pdf
#52
INCOM / IMPACC / INCOM versus RS-485
April 11, 2012, 08:48:24 AM
INCOM was invented by Westinghouse as a method of transmitting serial data down wires that would be in close proximity to high power conductors.  Characteristics of INCOM included:

  • Galvanic isolation between nodes
  • Frequency shift keying
  • Polarity insensitive
  • Tolerance for wiring with T's, Y's, taps and branches
  • Essentially unlimited number of nodes per cable (1000 listed as tested max.)
  • 10000 feet (3000 m) end to end distance without repeaters

The earliest 1200 bps INCOM networks operated by transmitting a 115.2 kHz tone to represent a binary 1 bit and absence of tone to indicate a binary 0 bit.  Since a relatively high frequency tone was chosen, a transformer was used to couple the board electronics to the network.  This provided ~1500 V isolation node to node and node to ground from the network.  A bandpass filter was used to detect the 115.2 kHz tone, which offered good noise rejection.  At the 1200 bps signalling rate, 96 cycles of 115.2 kHz represented one bit on the INCOM data packet, which offered good oversampling / redundancy, again increasing the signal to noise ratio.

Later, the network was upgraded to 9600 bps.  The faster signaling rate meant that only about 12 bits of the 115.2 kHz signal represented a single INCOM bit.  Since the tone oscillator had to be switched on and off, the natural ramp up and ramp down of the signal essentially meant that the first and last few cycles of the 110 kHz tone would not be exactly on frequency.  This reduced the amount of oversampling and reduced the reliability of the network at 9600.  The solution to this problem was to keep the tone oscillator switched on, but make it a voltage controlled oscillator (VCO) and have the binary zero represent a different tone sufficiently separated from the binary 1 tone, but not so far away as to make slewing to and from the binary 1 tone excessively difficult.  The second tone chosen was 92 kHz

  • Binary 1: 110 kHz
  • Binary 0: 92 kHz (9600 bps mode), no tone (1200 bps mode)
  • Message: 33 bits
  • Start Bit: 2 bits
  • Control Bit: 1 bit
  • Data: 24 bits
  • BHC Check: 5 bits code

What is the difference between INCOM and EIA-485 (formerly known as RS-485), a more common physical layer?






INCOMEIA-485
Galvanic IsolationTransformer*
Number of Nodes1000 per segment32 per segment
Wiring T's, Y's taps permitted?YesNo
* The EIA-485 standard does not include galvanic isolation, but a separate dc/dc power supply and opto-isolation can be added to provide isolation.  485 driver chips can be purchased that include this isolation built in.

For a discussion of noise immunity differences, see this document:
http://pps2.com/communications/files/INCOM/485vsINCOM.ppt
#53
INCOM / IMPACC / Connectivity Guide - Pre-1999
April 11, 2012, 08:07:59 AM
Here's a copy of the connectivity guide that was published shortly before the systems integration group was moved from the PMP Center to EESS.

http://pps2.com/communications/files/INCOM/Cnctvty2.ppt
#54
The adapter was used with the CONI card.  Since the CONI card only had an RJ-11 connection, this adapter was used to fan-out the RJ-11 into a twisted pair terminal strip.
#55
HMI/Video / VGA Pinouts
April 11, 2012, 07:55:59 AM
The standard pinouts for the 15-pin D-shell connector that connects VGA, XGA, etc. monitors to a standard "VGA" video card:

#56
Product Tech Support / Tech Support
April 10, 2012, 07:21:32 AM
While you have to register to be able to leave a message on this board, you can always contact Eaton directly with your technical questions.

Technical Resource Center
The Technical Resource Center provides product selection, application and general technical support for Eaton electrical products:

To reach an EatonCare representative, please call: (877) ETN CARE or (877) 386-2273.

Crisis Response
7x24 emergency support: Web Site for more information.
North America: 1-800-498-2678

Power Quality (UPS, Air Flow Management, Rack Power Distribution)
Tech Support: Web Site for more information.
#57
Encorp GPC / Encorp GPC Programming
April 09, 2012, 07:52:45 PM
The typical method of programming the GPC was to use the software provided by Encorp.  This software connected to the GPC using the Lonworks LonTalk protocol.  Since LonTalk required an external converter (usually RS-232 to LonTalk twisted pair), some users requested an alternate method of changing setpoints that did not require the LonTalk gateway.

Since the GPC also included a Modbus RS-485 port and since many of the setpoints within the GPC were memory mapped within the Modbus register map, changing setpoints via Modbus is possible.

A simple program loader that used the Modbus protocol was developed that can be downloaded from http://www.pps2.com/communications/DGMonitor.htm

A user manual explaining how to use this software can be reviewed http://www.pps2.com/communications/files/DGHelp.doc.

The source code for the VB 6.0 application can be downloaded here:
http://www.pps2.com/communications/files/DGMonitorSourceCode.zip

Complete Cross Reference of LonWorks SNVTs to Modbus Registers used in GPC:
http://pps2.com/communications/files/GPC/rev2-0%20control%20variables.xls

(Limited) Cross Reference of SNVT to Modbus Register used in this VB Program:
http://pps2.com/communications/files/GPC/Tagname%20Cross-Ref.xls
#58
As those who worked with with the HPPC 1500 or 1700 systems recall, the programming software and programming methodology are different for the HPPC compared with the PC700, 900, 1100 and 1200 processors.

Refer to http://www.pps2.com/communications/799.php and download the HPPC programming (APL or Advanced Program Loader) manual as well as the HPPC Systems Manual and the HPPC Systems Manual supplement for more information on those differences.
#59
First Time Visitor / Welcome
April 09, 2012, 12:53:38 PM
This forum provides technical information on connectivity, communications, software and systems integration regarding both current and legacy Eaton and Westinghouse communicating products.  It also includes general technical documentation about topics that I've encountered over my career.

After I retired from Eaton I took over the maintenance of this site.

You are encouraged to click around the board.  Use the search function to look up a topic. 

The button for search is at the top of each page.

We have switched off the acceptance of new member registration due to spam problems.  Sorry about that. 

If you have any questions, just message me via email or LinkedIn.

Dave Loucks
dgl@lec.engineer
https://lec.engineer
https://www.linkedin.com/in/dgloucks/
#60
INCOM / IMPACC / INCOM Protocol Documentation
April 05, 2012, 10:24:01 AM
If you wanted to dig deep into the INCOM protocol, here are the detailed documents from the Eaton web site:


Here's some more information on other INCOM networking devices: