file download area

power management products

click here for tools related to this page

note that there are additional files not listed below that can be retrieved directly from the cd in the files folder.

most of the files on this web site are zipped utilizing the pkzip program. if you are unfamiliar with pkzip or you are familiar but need a copy of the pkzip program for your computer, please visit the pkware web site to download the shareware program.

powernet software files

powerport
click here to download the install program for powerport on to your computer
===> powerport

powernet latest service pack
click here to download the install program to update your powernet software to the latest service release
===> powernet service pack

iq product software

file name size (bytes)
description

iq1000.zip 64,000 this program generates the iq 1000 ii's trip curve based on the information provided by the user on the setpoints. (this is a dos program but can run in windows 3.1x and windows 95)

dp4000.zip 146,000 this program will help you program the iq dp 4000. unzip and run under windows 3.1 or 95.

developers corner

for developers by developers. note no technical support on these products.

file name	size (bytes)	description

floatingpoint.zip	28.2kb	calculate the floating point values for incom communication developers

series2.zip	198,000	this utility will enable the user to configure a message to send to a device and display the hex representation and test the message. both the sent and received message can be displayed. (this is a dos program)

drimp121.zip	69,000	drimpacc enables the user to test the incom network. devices and the system master can be found to ensure communication is possible. (this is a dos program)

conimon.zip	41,000	conimon runs on a computer that has a coni card. this program will monitor all the data being sent over the incom network and has the ability to record 1000 messages. this is a very useful program for software developers who just can't seem to get it to work. (this is a dos program)

imp-fp.zip	29,000	this program will take an incom message input and provide the converted floating point number. (this is a dos program but can run in windows 3.1x and windows 95)

ipt231.zip	1,289,000	incom protocol test program: this is windows program that enables the user to configure an incom message and send it over the network and view the response from the device or devices desired. this is a windows program.