iq cable this accessory helps when applying the iq analyzer or the iq dp 4000 on 600 volt systems where the 480 or 600 volts is being terminated directly to the back of the unit. the iq cable can be ordered in lengths of 36 or 45 inches, catalog numbers iqacable and iq45cable respectively. this provides the ability to mount the power supply separate from the iq product in the gear taking the 480 or 600 volts off the door. order it now and play it safe. catalog numbers: iqacable : 36" extension iq45cable : 45" extension	iq flange the iq flange helps in those installations where extra door mounting space is required. this handy item provides an extra 2.5 inches of clearance bringing it out from the door of the gear. catalog number: iqflange
current transformers when you order your iq, order your transformers too. cutler-hammer offers a complete selection of low voltage (up to 600v) current transformers in both split core and solid core designs. these transformers are specifically selected for electronic metering applications. all solid core designs and selected split core designs offer ansi metering quality acuracy. the solid core designs also meet ansi c57.13 relay accuracy requirements including over-ranging capabilities. the secondary is 5 amperes at the rated primary current.	poni product operated network interface (poni) is an accessory that some meters and protective devices require to enable communications. products such as the iq analyzer, iq dp 4000, iq data plus ii, iq central energy display, etc. all require the poni module to enable communications. this product opens a whole new world and gives energy management a kick start for your facility. there are different types of poni modules available including the iponi, bponi, wponi, and the rs232 poni.
coni computer operated network interface card. this device plugs into the isa bus of your personal computer and turns it into an energy management tool. the coni card enables your computer to communicate with your iq products. take that information and put it to work. get additional detailed information from the coni3 product sheet right here on the internet. catalog number: coni3	mint ii the master incom network translater ii takes rs-232 communication messages and broadcasts them over the incom network. this unit connects to the com port of your computer and is used in various applications including remote communications through dial-up modems, line drivers, and even for those of you programmers out there that want to write your own drivers. the mint ii can be found on various installations that include plc's, industrial computers, personal computers, building managment systems and many other serial interface cards. additional information can be found on the mint ii product sheet including ordering information.