Programmable Trip Technology for the World's Most Reliable Family of Low Voltage Circuit Breakers


Series C Molded Case Circuit Breakers
Continuous ampere ratings from 70 to 2,500 amperes in L-, N-, and R-frames.
Type SPB Systems Pow-R™ Circuit Breakers
Continuous ampere ratings from 200 to 5,000 amperes.
Type DSII and DSLII Air Power Circuit Breakers
Continuous ampere ratings from 100 to 5,000 amperes.
Three Programming and Monitoring Methods Provide OPTIMum Flexibility

Stand Alone

OPTIMizer
A hand held programmer, used to program and monitor individual trip units. It plugs directly into the trip unit and accesses, displays, and configures information from the OPTIM Trip Unit. An operator can:
  • Complete initial system setup.
  • Configure the system.
  • Display information.
  • Test trip unit performance.
  • Set system password.
 Sub-Network

Breaker Interface Module
The panel mounted Breaker Interface Module (BIM) is used to program and monitor OPTIM Trip Units at the as-sem-bly…and access, display, and configure information from OPTIM Trip Units. Any combination of OPTIM Trip Units and/or Digitrip RMS 810 and 910 Trip Units* and/or IQ Energy Sentinels™ can communicate with the BIM. It duplicates OPTIMizer capabilities while providing these additional features:
  • Expanded energy monitoring. An oper-ator can set addresses for group energy monitoring and group energy readings.
  • Local and remote indication and alarming.
  • Expanded communications capabilities with OPTIM Trip Units, Digitrip RMS Trip Units, and IQ Energy Sentinels.
 IMPACC Communications

The IMPACC System
It provides programming and monitoring capabilities from a personal computer.
  • All OPTIM programming, configuration, advance warning, diagnostic, monitoring, and control capabilities can be accessed from a PC using IMPACC Series III software.
  • A coordination software package that displays, configures, and coordinates time-current protection curves.
  • Energy Billing Software (stand alone application specific package) provides capabilities to determine energy usage data by individual departments or tenants in a facility…and then creates "electric bills."
  • Waveform and harmonic display software allows displays of captured waveforms for phase-to-phase, phase-to-neutral, and neutral-to-ground voltages. The display can also include total harmonic distortion (THD) and individual harmonic currents of phase currents A, B, C, neutral, and ground.

Back